I made this as a decoration for Easter. I would recommend
Basic Information is loading...
Step 1: Cutting
Cut the bunny out from your material. I used cardboard as my material, my settings were 1750mm at 90%
Step 2: Assemble the bunny
First, slide the body of the bunny into the middle notch of the tail. Next slide the two big legs into the notches closest to the body. Then, slide the small legs into the remaining notches. Lastly, slide the ears onto the head.
Cut the bunny out from your material. I used cardboard as my material, my settings were 1750mm at 90%
First, slide the body of the bunny into the middle notch of the tail. Next slide the two big legs into the notches closest to the body. Then, slide the small legs into the remaining notches. Lastly, slide the ears onto the head.