Crystal Whiskey Glass (set of 4) with company logo
Using S1 w/40 watt diode and spray chalk
3 More images
Basic Information is loading...
Step 1: Clean Glass
Clean glass with acetone or suitable cleaner. I used acetone because I have it readily available as it is used in my business ( Fiberglass Manufacturing).
Step 2: Coat Glass
Spray Area to be engraved with “SPRAY CHALK”. I purchased it at Michaels ($6 Cdn/can). Works awesome and easy, easy, clean up. Spray 2 - 3 light coats allowing to dry for a couple of minutes in between coats. It goes on smoothly and drys quickly ( I allowed about 15 minutes after the second coat for this) It comes in several colors (which I don't think it matters what color you use). I used blue for this application
Step 3: Engrave
Setting 1
Process Method
Vector Laser Engrave
Power(%) or Cut Pressure(g)
40
Speed(mm/s)
70
Lines per cm
200
Pass
1
Other Parameters
Using 40 watt diode laser with RA2 rotary chuck.
Smoke System On Max
Air Assist set to 3
USING XTOOLS CREATIVE SPACE
Nice Clean Deep Etching onto the glass.
When done rinse glass with warm water. Soo So Easy!
Clean glass with acetone or suitable cleaner. I used acetone because I have it readily available as it is used in my business ( Fiberglass Manufacturing).
Spray Area to be engraved with “SPRAY CHALK”. I purchased it at Michaels ($6 Cdn/can). Works awesome and easy, easy, clean up. Spray 2 - 3 light coats allowing to dry for a couple of minutes in between coats. It goes on smoothly and drys quickly ( I allowed about 15 minutes after the second coat for this) It comes in several colors (which I don't think it matters what color you use). I used blue for this application
Nice Clean Deep Etching onto the glass.
When done rinse glass with warm water. Soo So Easy!